Measurement unit
Paved area
Feet, Metres, Inches, Centimetres, Millimetres
Paver Calculator
Estimate paving blocks, bedding sand and edge lengths.
Open this toolPaving orders need block quantities, bedding sand and the edges around the area. Those are separate purchase items.
Enter the measured paved area and rectangular module size, then apply a cutting allowance. Check bedding depth and edge lengths on their own measurement basis.
Inputs and controls
Length
Paved area
Allowed range: 0.001 to 100000
Width
Paved area
Allowed range: 0.001 to 100000
Paver length
Paver module · mm
Allowed range: 1 to 1000
Paver width
Paver module · mm
Allowed range: 1 to 1000
Joint width
Paver module · mm
Allowed range: 0 to 50
Sand bed thickness
Paver module · mm
Allowed range: 0 to 300
Ordering allowance
Paver module · %
Allowed range: 0 to 100
Added once to the measured requirement.
Price per paver
Paver module · PKR / paver
Allowed range: 0 to 1000000000
Optional. Enter your own supplier quote.
How to use
- Choose measurement unit. Enter length and width.
- Enter paver length, paver width, joint width, sand bed thickness, ordering allowance and price per paver.
- Select Calculate estimate. Read the returned values alongside the assumptions below before copying, exporting or acting on the result.
Why use this tool
Keeping blocks, bedding and edging together helps you assemble a practical shopping list without confusing their units.
Before relying on the result
Rectangular paver modules only. Bedding volume excludes compaction and base layers.
Tool limitations
Rectangular paver modules only. Bedding volume excludes compaction and base layers.
Questions
Does the sand volume include the base layer?
No. Bedding sand is separate from base preparation and compaction. Add those requirements from the project specification.
What should I check before using Paver Calculator?
Check Measurement unit, Length, Width and Paver length. Use the exact units shown beside the controls and replace any example values with your own inputs.
Source page last modified: 2026-10-01T14:08:57+00:00. This profile describes the tool; use its page to run it.
Markdown profile