# Paver Calculator

Estimate paving blocks, bedding sand and edge lengths.

[Open this tool](https://whatson.pk/pavers-calculator/)

Category: Construction

Paving orders need block quantities, bedding sand and the edges around the area. Those are separate purchase items.

Enter the measured paved area and rectangular module size, then apply a cutting allowance. Check bedding depth and edge lengths on their own measurement basis.

## Inputs and controls

* Measurement unit: Feet; Metres; Inches; Centimetres; Millimetres
* Length. Allowed range: 0.001 to 100000
* Width. Allowed range: 0.001 to 100000
* Paver length (mm). Allowed range: 1 to 1000
* Paver width (mm). Allowed range: 1 to 1000
* Joint width (mm). Allowed range: 0 to 50
* Sand bed thickness (mm). Allowed range: 0 to 300
* Ordering allowance (%). Allowed range: 0 to 100. Added once to the measured requirement.
* Price per paver (PKR / paver). Allowed range: 0 to 1000000000. Optional. Enter your own supplier quote.

## How to use

* Choose measurement unit. Enter length and width.

* Enter paver length, paver width, joint width, sand bed thickness, ordering allowance and price per paver.

* Select Calculate estimate. Read the returned values alongside the assumptions below before copying, exporting or acting on the result.


## Why use this tool

Keeping blocks, bedding and edging together helps you assemble a practical shopping list without confusing their units.


## Before relying on the result

Rectangular paver modules only. Bedding volume excludes compaction and base layers.


## Tool limitations

Rectangular paver modules only. Bedding volume excludes compaction and base layers.

## Questions

### Does the sand volume include the base layer?

No. Bedding sand is separate from base preparation and compaction. Add those requirements from the project specification.

### What should I check before using Paver Calculator?

Check Measurement unit, Length, Width and Paver length. Use the exact units shown beside the controls and replace any example values with your own inputs.

Source page last modified (UTC): 2026-10-01T14:08:57+00:00

This profile describes the tool. It does not execute it or supply a professional certification.