Measurement unit
Room settings
Feet, Metres, Inches, Centimetres, Millimetres
Paint Calculator
Estimate paint for rooms, selected walls and ceilings.
Open this toolPaint coverage comes from the product and the surface, not simply the size of the house.
List the walls or rooms being painted, include ceilings where needed and use the tin's coverage rate. Change coat counts separately from the measured area.
Inputs and controls
Include ceilings
Room settings
Yes, No
Finish coats
Paint specification
Allowed range: 1 to 10
Coverage per coat
Paint specification · m²/litre
Allowed range: 0.1 to 100
Container size
Paint specification · litres
Allowed range: 0.01 to 1000
Ordering allowance
Paint specification · %
Allowed range: 0 to 100
Added once to the measured requirement.
Price per container
Paint quote · PKR / container
Allowed range: 0 to 1000000000
Optional. Enter your own supplier quote.
Room
Rooms and wall selection
Length
Rooms and wall selection
Allowed range: 0.001 to 100000
Width
Rooms and wall selection
Allowed range: 0.001 to 100000
Height
Rooms and wall selection
Allowed range: 0.001 to 100000
Long walls
Rooms and wall selection
Allowed range: 0 to 2
Short walls
Rooms and wall selection
Allowed range: 0 to 2
Openings
Rooms and wall selection · sq ft
Allowed range: 0 to 10000000
How to use
- Choose measurement unit and include ceilings.
- Enter finish coats, coverage per coat, container size and ordering allowance.
- Enter price per container.
- Add the entries in rooms and wall selection as separate rows. Include room, length, width, height, long walls, short walls and openings for each row.
- Select Calculate estimate. Read the returned values alongside the assumptions below before copying, exporting or acting on the result.
Why use this tool
Selected surfaces and product coverage make comparisons useful when you are choosing between different pack sizes or paint systems.
Before relying on the result
Use coverage from your paint tin or product sheet. Primer is a separate product and is not included.
Tool limitations
Use coverage from your paint tin or product sheet. Primer is a separate product and is not included.
Questions
Is primer included?
No. Estimate primer with its own area, coverage and coat requirements. Do not assume the finishing paint quantity covers a separate primer product.
What should I check before using Paint Calculator?
Check Measurement unit, Include ceilings, Finish coats and Coverage per coat. Use the exact units shown beside the controls and replace any example values with your own inputs.
Source page last modified: 2026-10-01T14:08:57+00:00. This profile describes the tool; use its page to run it.
Markdown profile