Array rated power
PV and conversion · W
Allowed range: 0.01 to 100000000
MPPT Output Current Worksheet
Estimate battery side controller current from an array power allowance.
Open this toolMPPT output current is a battery side check. It is different from the PV input voltage and current limits.
Enter the array power allowance and charging voltage, then compare the estimated output current with the controller rating.
Inputs and controls
Conversion efficiency
PV and conversion · %
Allowed range: 0.01 to 100
Current allowance
PV and conversion · %
Allowed range: 0 to 200
Battery charging voltage
Battery side and controller · V
Allowed range: 0.1 to 2000
Controller output current rating
Battery side and controller · A
Allowed range: 0.01 to 1000000
How to use
- Enter array rated power, conversion efficiency and current allowance.
- Enter battery charging voltage and controller output current rating.
- Select Calculate result. Read the returned values alongside the assumptions below before copying, exporting or acting on the result.
Why use this tool
The separate output check helps identify which controller specification is being compared.
Before relying on the result
This compares output current only. Independently verify PV Voc in cold conditions, input Isc, MPPT range, allowed array power and battery limits. Passing output current is not approval.
Tool limitations
This compares output current only. Independently verify PV Voc in cold conditions, input Isc, MPPT range, allowed array power and battery limits. Passing output current is not approval.
Questions
Does passing output current approve the PV array?
No. Cold Voc, input Isc, MPPT range, permitted array power and battery limits still require review.
What should I check before using MPPT Output Current Worksheet?
Check Array rated power, Conversion efficiency, Current allowance and Battery charging voltage. Use the exact units shown beside the controls and replace any example values with your own inputs.
Source page last modified: 2026-10-01T18:56:36+00:00. This profile describes the tool; use its page to run it.
Markdown profile