Shape
Layer dimensions
Rectangle, Circle
Crush & Gravel Calculator
Measure an aggregate layer and estimate volume, mass and cost.
Open this toolThe same gravel volume can have different weights because grading and moisture affect bulk density.
Start with the layer area and thickness, then enter a density suited to the supplied aggregate. Compare the resulting volume and mass before applying a purchase rate.
Inputs and controls
Measurement unit
Layer dimensions
Feet, Metres, Inches, Centimetres, Millimetres
Length
Layer dimensions
Allowed range: 0.001 to 100000
Width
Layer dimensions
Allowed range: 0.001 to 100000
Diameter
Layer dimensions
Allowed range: 0.001 to 100000
Layer thickness
Layer dimensions · in
Allowed range: 0.01 to 100
Loose bulk density
Loose material · kg/m³
Allowed range: 100 to 5000
Ordering allowance
Loose material · %
Allowed range: 0 to 100
Added once to the measured requirement.
Aggregate quote
Loose material · PKR / cft
Allowed range: 0 to 1000000000
Optional. Enter your own supplier quote.
How to use
- Choose shape and measurement unit. Enter length, width, diameter and layer thickness.
- Enter loose bulk density, ordering allowance and aggregate quote.
- Select Calculate estimate. Read the returned values alongside the assumptions below before copying, exporting or acting on the result.
Why use this tool
Separate volume and weight figures help when one supplier quotes by load and another quotes by mass.
Before relying on the result
Loose bulk density varies with grading and moisture. Change it to match your supplier.
Tool limitations
Loose bulk density varies with grading and moisture. Change it to match your supplier.
Questions
Can I leave the starting density unchanged?
Use it only as an example. Ask the supplier for a suitable bulk density or check delivered material before relying on the weight estimate.
What should I check before using Crush & Gravel Calculator?
Check Shape, Measurement unit, Length and Width. Use the exact units shown beside the controls and replace any example values with your own inputs.
Source page last modified: 2026-10-01T14:08:57+00:00. This profile describes the tool; use its page to run it.
Markdown profile